JESSEN 9915 PRIMER EPOXY
PRODUK DESCRIPTION : JESSEN 9915 primer epoxy is epoxy based primer before recoated by chemical resistant pain.
RECOMMENDED USE : For
tanks, pipes and other steel material.
TECHNICAL INFORMATION :
Colour : Green / Black
Solids (% by volume) : 50 ± 2
Flash Point : 23° C ± 2
Gloss : Flat
Water resistance : Very Good
Solvent resistance : Excellent
Chemical resistance : Excellent
Film thickness and spreading rate :
Minimum
Maximum Typical
Film thickness, dry 80 150 100
Film thickness, wet 160 300 200
Theoretical spreading
rate 6,3 3,3 5
APPLICATION DATA :
Application methode : Airless spray. Brush may be used for smaller areas and Roller
Mixing ratio (with hardener) : 4
: 1
Thinner/Cleaner : JESSEN Thinner 9915
Data
airless spray :
Pressure at nozzle : 15
Mpa min (150 kp/cm2, 2100 psi.)
Nozzle tip : 0.46 – 0.69 mm (0.018 – 0.027”)
Spray angle : 40 – 80°
Filter : Check to ensure that filters are clean
DRYING TIME :
Drying time are
generally related to air circulation, temperature, film thickness and number of
coats, and will be affected correspondingly. The figures given in the table are
typical with :
* Good Ventilation (Outdoor exposure or free
circulation of air)
* Recommended film thickness
* One coat on top of inert substrate
Substrate temperature 5°C 10°C 23°C 40°C
Surface dry 12h 7h 3,5h 1,5h
Through dry 36h 24h 6h 4h
Dry to recoat 36h 24h 12h 5h
PACKING SIZE :
20 KGS container, Comp.
A (Base) and 5 KG Comp. B (Hardener).
Packing may vary from
country to country according to local requirements,
DISCLAIMER
The
information in this data sheet is given to the best of our knowledge based on
laboratory testing and practical experience. However, as the product is often
used under conditions beyond our control, we cannot quadrate anything but the
quality of the product itself. We reverse the right to change the given data without
notice.
0 komentar: