Quality Statement
JESSEN 9918
RUST CONVERTER
KEISTIMEWAAN
JESSEN 9918 (Rust Converter) merupakan cairan pembersih untuk mematikan karat dari permukaan besi serta
membentuk lapisan film pasivasi, sehingga permukaan tersebut tahan terhadap
korosi.
·
JESSEN
9918 sangat ekonomis karena berbentuk konsentrat dan bisa diencerkan dengan air
biasa.
·
JESSEN
9918 juga berfungsi sebagai primer sebelum melakukan pengecatan.
·
KEGUNAAN
JESSEN 9918 juga
dapat dipakai untuk membersihkan endapan oksida logam dari permukaan tembaga,
kuningan serta logam lainnya (kecuali zinc dan galvanis)
Gunakan JESSEN 9918 RUST CONVERTER untuk
mematikan karat pada semua logam, baik yang akan dicat maupun tidak.
JESSEN 9918
RUST CONVERTER
Sifat
Fisika dan Kimia
Bentuk : Liquid (Cairan)
Warna : Kuning Muda
Sifat Cairan : Non
Flammable
Tidak menguap dan tidak berbau
Menembus
pada titik karat baik dari luar maupun dari dalam
Bercampur
100% dengan air
Tidak
berbahaya terhadap kulit
Menghindari terbentuknya karat atau oksidasi lebih
lanjut setelah proses aplikasi dilakukan.
Kegunaannya : Pada
alat-alat berat bengkel, industri
Tanki-tangki minyak dan plat-plat yang
berkarat.
Sistem Pemakaian : Direndam atau
dikuaskan
Cara Penggunaan : Direndam selama 10 s/d 15 menit supaya cairan
penetrasi kedalam dan menembus pada pusat karat.
Kuaskan
pada material yang berkarat dengan
perbandingan sesuai dengan tebal tipisnya karat.
Perbandingan : 1 (Satu)
liter JESSEN 9918
: 3 s/d 5 liter air.
Irit
dan efisien dalam penggunaannya karena dapat diencerkan dengan air biasa sesuai dengan konsentrasi
karat atau oksidasi yang ada.
Keistimewaan : JESSEN 9918 dapat mematikan karat baik dari luar
maupun dari dalam.
- Mencegah
terjadinya oksidasi dan karat lebih lanjut.
- Aman dalam
pemakaian dan tidak berbahaya
- Merupakan
pencegahan karat yang sangat
hebat
dan mempunyai kemampuan menahan karat yang terjadi akibat serangan udara lembab
& atmosfir air laut.
Methode Penyimpanan : Simpan dalam gudang penyimpanan dengan suhu ruangan dan dalam kondisi keemasan tertutup rapat. Hindarkan dan jauhkan dari jangkauan anak-anak.
PRODUK DESCRIPTION : JESSEN 9916 Chemical Resistant Paint is a high-build epoxy coating with high resistance to a wide range of chemicals and solvents.
RECOMMENDED
USE : For
tanks, pipes and other steel material.
TECHNICAL
INFORMATION
:
Colour : GREY
Solids (% by volume) : 50 ± 2
Flash Point : 25° C ± 2 (seta flash)
Gloss : Flat
Water resistance : Very Good
Solvent resistance : Excellent
Chemical resistance : Excellent
Film thickness and spreading rate :
Minimum
Maximum Typical
Film thickness, dry 80 150 100
Film thickness, wet 160 300 200
Theoretical spreading
rate 6,3 3,3 5
APPLICATION
DATA :
Application methode : Airless spray. Brush may be used for smaller areas and Roller
Mixing ratio (with hardener) : 4
: 1
Thinner/Cleaner : JESSEN 9916T
(Special Thinner
for 9916).
Data
airless spray :
Pressure at nozzle : 15
Mpa min (150 kp/cm2, 2100 psi.)
Nozzle tip : 0.46 – 0.69 mm (0.018 – 0.027”)
Spray angle : 40 – 80°
Filter : Check to ensure that filters are clean
DRYING
TIME :
Drying time are
generally related to air circulation, temperature, film thickness and number of
coats, and will be affected correspondingly. The figures given in the table are
typical with :
* Good Ventilation (Outdoor exposure or free
circulation of air)
* Recommended film thickness
* One coat on top of inert substrate
Substrate temperature 5°C 10°C 23°C 40°C
Surface dry 12h 7h 3,5h 1,5h
Through dry 36h 24h 6h 4h
Dry to recoat 36h 24h 12h 5h
PACKING
SIZE :
20 KGS container, Comp.
A (Base) and 5 KG Comp. B (Curing agent).
Packing may vary from
country to country according to local requirements,
DISCLAIMER
The
information in this data sheet is given to the best of our knowledge based on
laboratory testing and practical experience. However, as the product is often
used under conditions beyond our control, we cannot quadrate anything but the
quality of the product itself. We reverse the right to change the given data
without notice
PRODUK DESCRIPTION : JESSEN 9915 primer epoxy is epoxy based primer before recoated by chemical resistant pain.
RECOMMENDED USE : For
tanks, pipes and other steel material.
TECHNICAL INFORMATION :
Colour : Green / Black
Solids (% by volume) : 50 ± 2
Flash Point : 23° C ± 2
Gloss : Flat
Water resistance : Very Good
Solvent resistance : Excellent
Chemical resistance : Excellent
Film thickness and spreading rate :
Minimum
Maximum Typical
Film thickness, dry 80 150 100
Film thickness, wet 160 300 200
Theoretical spreading
rate 6,3 3,3 5
APPLICATION DATA :
Application methode : Airless spray. Brush may be used for smaller areas and Roller
Mixing ratio (with hardener) : 4
: 1
Thinner/Cleaner : JESSEN Thinner 9915
Data
airless spray :
Pressure at nozzle : 15
Mpa min (150 kp/cm2, 2100 psi.)
Nozzle tip : 0.46 – 0.69 mm (0.018 – 0.027”)
Spray angle : 40 – 80°
Filter : Check to ensure that filters are clean
DRYING TIME :
Drying time are
generally related to air circulation, temperature, film thickness and number of
coats, and will be affected correspondingly. The figures given in the table are
typical with :
* Good Ventilation (Outdoor exposure or free
circulation of air)
* Recommended film thickness
* One coat on top of inert substrate
Substrate temperature 5°C 10°C 23°C 40°C
Surface dry 12h 7h 3,5h 1,5h
Through dry 36h 24h 6h 4h
Dry to recoat 36h 24h 12h 5h
PACKING SIZE :
20 KGS container, Comp.
A (Base) and 5 KG Comp. B (Hardener).
Packing may vary from
country to country according to local requirements,
DISCLAIMER
The
information in this data sheet is given to the best of our knowledge based on
laboratory testing and practical experience. However, as the product is often
used under conditions beyond our control, we cannot quadrate anything but the
quality of the product itself. We reverse the right to change the given data without
notice.
Created By Fatchur Rozi | Distributed By PT.PIE